WhatsApp / WeChat (Paper Bag & Slitting Machines): +86 137 3690 0583 • WhatsApp (Plastic Bag & Printing Machines): +86 135 6615 5203 • shiner@cntowee.com

Flexo Printing Machine Manufacturer in China — Gear Types, Specifications & Ink Systems

TWMACHINE manufactures narrow web flexographic printing machines for flexible packaging converters, label printers and film producers. The range covers four drive configurations — straight gear, helical gear, timing belt and central drum — so you can match the machine to the print repeat length, the substrate and the volume you need. This page lists the real specifications of every model: web width, printing width, printing length, speed, anilox configuration, dry system, power, footprint and weight. Whether you are printing film for a bag making line, a self-adhesive label roll or a printed sack, the selection guide below shows where each machine type fits.

Our Flexo Printing Machine Range

Each card links to the full specification sheet, ink and anilox notes and price list for that model. The comparison table and selection guide that follow use the same factory data.

standard flexo printing machine
50m/m 1-6 Colors Flexo Printing Machine
medium speed printing machine
70m/m Medium Speed Printing Machine
4 COLORS
120m/min High Speed Flexo Printing Machine
Central Drum Flexo Printing Machine

What Is a Flexo Printing Machine?

A flexographic printing machine transfers ink from a raised relief plate onto a moving web of film, paper or label stock. Ink is metered by a metering roller — an anilox roller — which holds a precise volume of ink in microscopic cells on its surface. A doctor blade wipes the surface flat so only that volume transfers to the printing plate, and the plate prints the image onto the substrate. The web then passes through a drying system before being rewound.

The main variants differ in how the print cylinders are driven. Straight gear machines run the gears in direct mesh, which keeps the cost low but ties the gear ratio to the print repeat length. Helical gear machines use helical gears, allowing a much wider range of repeat lengths and better registration at higher speeds. Timing belt machines drive the cylinders individually through belts, so each cylinder can be set independently. Central drum machines mount all print units around one large common drum, which gives very short web paths and fast make-ready for repeat work.

Our machines are supplied as stack type (vertical) presses. Ink systems can be specified as solvent, water based or UV, and the dry system is matched to the chosen ink. Ceramic anilox rollers are available from 300 to 900 lpi, with metal rollers from 100 to 300 lpi as standard on the gear machines.

Flexo Printing Machine Models and Technical Specifications

All four machine types share the same working width family — 600, 800, 1000 and 1200 mm — so they can be specified consistently across a plant. The differences are speed, repeat length, drive configuration and dry system.

ModelDrive typeMax. material width (mm)Max. printing width (mm)Printing length (mm)Speed (m/min)Anilox rollerPower (kW)Machine size (mm)
YT6600 / YT6800 / YT61000 / YT61200Straight gear600 / 800 / 1000 / 1200560 / 760 / 960 / 11607.5–40 (190–1600)10–50Metal 100–300 lpi; ceramic 300–900 lpi optional18 / 20 / 22 / 244400–4500 × 1800–2400 × 2300
TW-A6600 / A6800 / A61000 / A61200Helical gear600 / 800 / 1000 / 1200560 / 760 / 960 / 11607.5–40 (190–1600)10–80Metal 100–300 lpi; ceramic 300–900 lpi optional18 / 20 / 22 / 244400–4500 × 1800–2400 × 2300
TW-H6600 / H6800 / H61000 / H61200Timing belt600 / 800 / 1000 / 1200560 / 760 / 960 / 11607.5–40 (190–1600)10–120Chamber doctor blade; ceramic 300–900 lpi optional35 / 38 / 40 / 455600 × 2000–2600 × 2800
TW-CI4600 / CI4800 / CI41000 / CI41200Central drum600 / 800 / 1000 / 1200560 / 760 / 960 / 116011.8–31.5 (300–800)10–180Chamber doctor blade; ceramic 300–900 lpi optional35 / 38 / 40 / 455600 × 2000–2600 × 2800

Machine weight follows the configuration: the gear machines run at 2300 to 2900 kg while the timing belt and central drum machines, with their larger dry systems, weigh 3000 to 7500 kg. The central drum models are the heaviest because of the common drum and the extended dryer, but they are also the fastest — up to 180 m/min — and the quickest to set up for repeat jobs.

Main Applications of Flexo Printing Machines

  • Printed film for bag making — printing PE, PP, OPP and BOPP film that feeds directly into a bag making or pouch converting line.
  • Flexible packaging laminates — printing polyester, nylon and CPP substrates for laminated structures used in snacks, coffee and chemical packaging.
  • Self-adhesive labels — narrow web printing on BOPP or paper label stock at up to 120 m/min, feeding an automatic die-cutting and peeling line.
  • Paper and sack printing — kraft paper and woven PP sack cloth for cement, chemical and agricultural packaging.
  • Carton and corrugated preprint — water based inks on linerboard for corrugated packaging, where the dryer is sized for a low temperature web.
  • Security and specialty printing — guillotine and rotary register work, holographic and varnish effects, for brands that need variable print on short runs.

How to Choose the Right Flexo Printing Machine

The choice of drive type is the single decision that shapes the rest of the specification. Everything else — width, number of colours, ink system and dryer — follows from it. Work through the following in order and the model becomes obvious.

  • How many colours and how fast — the straight gear machine tops out at 50 m/min and the helical gear at 80 m/min. If you are running four to six colours above 100 m/min, the timing belt or central drum machines are the only realistic options.
  • Print repeat length — helical and timing belt machines handle repeats from 7.5–40 mm up to 190–1600 mm. The central drum covers 11.8–31.5 mm and 300–800 mm. If your artwork has a long repeat, the central drum machine is the fastest to set up on.
  • Make-ready time and job mix — central drum machines win on short runs and frequent job changes because the cylinders are all on one drum and changeovers are quick. Straight and helical gear machines win on long runs of one job.
  • Ink and substrate — water based inks need a dryer sized for low temperature and no solvent recovery; solvent inks need a dryer with solvent recovery; UV needs a UV cure unit and a different ink supply. Send us the substrate and the ink you intend to use and we will configure the ink system and dryer to match.
  • Anilox specification — fine screens from 300 to 900 lpi give sharper detail on film and label work; coarser metal aniloxes from 100 to 300 lpi lay down more ink and run faster on solid coverage.
  • Web width and growth — every model in the range is available in 600, 800, 1000 and 1200 mm, so you can start on the width you need now and add width later on the same platform.
  • Unwind and rewind — the gear machines take reels up to 600 mm diameter, the timing belt machine up to 1300 mm. Larger reels reduce reel changes on long runs and are worth specifying.

Why Buyers Choose TWMACHINE

  • All four drive types in one catalogue. You can move from a straight gear machine to a central drum machine later without changing supplier, and we can quote the upgrade path for the ink system and dryer.
  • Factory-direct pricing. The gear box, print unit and dryer are built in our own workshop, so the price reflects the machine rather than the supply chain around it.
  • Configured to your substrate. Ink system, dryer type, anilox screen count, unwinder and rewind diameter, register control and number of units are specified per order.
  • One width family across four machines. 600, 800, 1000 and 1200 mm on every type means spares and operator training transfer between machines.
  • Service and wear parts. Doctor blades, anilox rollers, bearings, gears, belts and heating elements are supplied from stock, with machine dimensions and power confirmed on the order for accurate foundation and electrical planning.

Frequently Asked Questions

What is the difference between helical gear and timing belt flexo presses?

Both allow a wide range of print repeat lengths, but they get there differently. Helical gear machines mesh helical gears directly, which is mechanically simple and durable, and the gear ratio sets the repeat. Timing belt machines drive each cylinder through its own belt, so every cylinder is set independently and any combination of repeats can be run on the same job. The timing belt machine also carries a larger dryer and runs faster, up to 120 m/min against 80 m/min for the helical gear, at the cost of more floor space and about twice the installed power.

How many colours can these machines print?

The print units are modular, so colour count is a build option rather than a model limit. The machines in this range are normally supplied with four to six units, and the drum and dryer arrangements are sized accordingly. Because each additional unit adds length, power and dryer capacity, we recommend confirming the colour count against your artwork before the order — chasing a colour later means changing the frame, not just adding a station.

Can the machine print water based ink without solvent recovery?

Yes, and for paper and corrugated work water based is usually the right default. The dryer is then configured for a low temperature web with no solvent recovery unit, which lowers the power requirement and removes the need for exhaust ducting. Solvent inks on film need a recovery system, and UV needs a UV cure section. Send us the substrate, the ink and the monthly volume and we will specify the ink system and dryer accordingly.

What film thickness and material can be printed?

The machines handle the film grades used in flexible packaging: PE, PP, OPP, BOPP, CPP, PET, PA and PVC film, plus paper, label stock and woven sack cloth. Because film stretches, the web tension control and the drying temperature have to be matched to the material, and thicker film needs a higher dryer temperature and a lower running speed. Tell us the material and thickness and we will confirm the dryer settings and the recommended speed.

Request a Quotation

Send us your substrate, web width, number of colours, repeat length, required speed and monthly volume. We will recommend the drive type and configuration that fits, with a full specification sheet, a foundation and power layout drawing and an indicative price. Since every press is configured to order, the more detail you give on the artwork and the material, the more accurate the machine we quote.

WhatsApp / WeChat (Paper Bag & Slitting Machines): +86 137 3690 0583 | WhatsApp (Plastic Bag & Printing Machines): +86 135 6615 5203